genesis8.02B跟9.0的区别！！

laoshiqiang · 发表于 2006-8-5 20:04:00

各位朋友，请问一下genesis8.02B跟9.0以上版本在功能上有什么不同或者是提高的啊？？我只知道9.0以上版本在ALT+T那功能里可以自动抓取选择区域的中心！！还有没有别的不同的功能啊，希望大家可以交流学习一下

pcbshen · 发表于 2006-8-5 23:29:00

[em01]• Modify rotated/flipped step if original step was modified
• Select by reference for thermals
• Mirror, Rotate in Paste Buffer operation
• Rout Actions
– Pad to outline - new function
– Add Rout slot in any angle
• Copper area
– Calculate Copper area for different parts of the stackup (for
sequential builds)
– Copper area Calculation to include plated board edge
• Drill Tool Manager
– Sort tools in DTM after merging two drill layers
– Add description of slots in DTM and Drill map

laoshiqiang · 发表于 2006-8-8 11:07:00

先谢谢各位大虾

还想请问一下，genesis8.02输出GERBER，用CAM350或GCCAM读入会有很多层，我听我朋友说用9.0输出就不会这样，是不是要修改哪些参数啊？？

[此贴子已经被作者于2006-8-8 11:09:35编辑过]

hxw_lyg · 发表于 2006-9-17 18:47:00

8.02b的如何安装呀

请误问这位大哥能不能发一分说明给我呀主要是到用算码器那一关

hxw-lyg@163.com

yangch99 · 发表于 2006-10-5 16:56:00

klwrthyp · 发表于 2007-1-29 00:58:00

图片点击可在新窗口打开查看 • Modify rotated/flipped step if original step was modified
• Select by reference for thermals
• Mirror, Rotate in Paste Buffer operation
• Rout Actions
– Pad to outline - new function
– Add Rout slot in any angle
• Copper area
– Calculate Copper area for different parts of the stackup (for
sequential builds)
– Copper area Calculation to include plated board edge
• Drill Tool Manager
– Sort tools in DTM after merging two drill layers
– Add description of slots in DTM and Drill map

能有哪位英语高手翻译一下～

找不到名字 · 发表于 2007-1-30 21:18:00

9.0阻焊的ＥＲＦ似乎有一个缺陷－－－－默认的就会改小，在８.０里面是可以设置成不改小的，在９.０里我就找不到

wenan9 · 发表于 2007-3-15 14:24:00

不太清楚

		自动登录	找回密码
密码			注册